Since you are looking for both a transmission cooler and an engine oil cooler I would recommend you consider getting a combination transmission cooler/engine oil cooler. If you use a combination cooler it will help simplify the installation process because it will reduce the amount of coolers that need to be installed.
I would recommend you get a Derale Combination Transmission and Engine Oil Cooler # D15902. This is a large enough cooler that you would work well to keep the transmission... view full answer...
Since you are looking for an engine oil cooler and a transmission cooler I would recommend a Derale Combination Transmission and Engine Oil Cooler # D15902. You will be able to route both your transmission fluid and engine oil through this unit to keep both your engine oil and transmission fluid cool.
I attached an FAQ on transmission coolers and engine oil coolers as well as a video of a transmission cooler being installed for you to check out. view full answer...
The Derale Plat-Fin Engine Oil Cooler Kit, # D15451, will fit your 2005 Dodge Ram 1500 with 5.7L engine.
The kit has multiple adapter sleeve nuts that you will use to install sandwich adapter to your Dodge's engine. According to Derale, the 22mm x 1.5 hex sleeve nut is the correct sleeve needed for your 2005 Dodge Ram. Follow the instructions for installing the remaining components of the oil cooler kit. You can view the instructions for # D15451 by clicking on the link at the bottom... view full answer...
The most economically priced engine oil cooler we offer is the Derale Tube-Fin Engine Oil Cooler Kit # D15503, while is more expensive than the Derale Combination Transmission/Engine Oil Cooler # D13302 that you referenced it also includes all of the necessary fittings and adapters to install it on your vehicle that the # D13302 does not.
I attached an FAQ article on engine oil coolers for you to check out also. view full answer...
I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler that is compatible with this.
I would recommend you get the Derale Stacked-Plate Engine Oil Cooler Kit part # D15602. This kit comes with a compatible oil filter sandwich adapter so that it will work for you. This cooler is a stacked plate cooler, which of all the different styles of coolers this is the most efficient.
Here... view full answer...
The oil cooler I would recommend for your 2013 Ram 1500 with a 5.7 liter that is confirmed to fit your oil filter would be the Derale Stacked-Plate Engine Oil Cooler Kit # D15605.
Your oil filter has M22x1.5 threads and an outside diameter of 3 inches which is compatible with this kit.
This is a stacked plate cooler design which is the most efficient style of oil cooler around so it should work very well for you.
I attached an FAQ article on engine oil coolers for you to check out as well. view full answer...
Yes, the Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter Multiple Threads # D15405 will work on your 2011 Dodge Durango Citadel AWD with the 5.7L engine.
The Derale # D15405 engine oil cooler is a universal kit that has different engine oil filter sleeves. The sleeves allow you to mount the correct oil filter depending on your vehicle. Derale's application guide lists the oil filter thread size for 2004-2014 Dodge/Chrysler vehicles as 22 x 1.5 mm. That size sleeve... view full answer...
The best engine oil cooler for your 1998 Jeep Cherokee 4.0 I6 will be the largest one you have space for in front of your radiator behind your grill as this will provide the cooler with the most airflow which will in turn create the best performance. You will want to measure this space prior to purchasing a cooler. If you have space, I recommend using the Derale Tube-Fin Engine Oil Cooler Kit w/ Sandwich Adapter part # D15502. This engine oil cooler kit has everything you will need for... view full answer...
I would recommend the Derale engine oil cooler kit, part # D15602, for your 2006 Dodge Dakota Quad 4.7L V8. This oil cooler is the stacked-plate design, which is the most efficient and smallest in size. It comes with a sandwich adapter that mounts between the engine and the oil filter and supplies external lines for the oil cooler. It also has an assortment of multiple sleeve nuts to ensure proper filter thread size. It does include the correct size for your vehicle, which is the 3/4 inch... view full answer...
You will need to add oil to compensate for the extra capacity of an oil cooler and filter on your 1994 Chevy K1500. These components will retain some oil when the engine is not running, much like your current oil filter, but it will not be to their full capacity.
The remote oil filter can be mounted anywhere in the engine compartment. view full answer...
The Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter Multiple Threads # D15405 will work on your Dodge Hemi 5.7L engine.
The Derale # D15405 engine oil cooler is a universal kit that has different engine oil filter sleeves. The sleeves allow you to mount the correct oil filter depending on your vehicle. Derale's application guide lists the oil filter thread size for 2004-2014 Dodge/Chrysler vehicles as 22 x 1.5 mm. That size sleeve is included in the Derale Engine... view full answer...
We have an engine oil cooler that will work for your 2003 Ford Ranger.
I recommend the Derale Tube-Fine Engine Oil Cooler Kit, # D15502, has a 16-5/8 inches wide x 7-5/8 inches tall x 3/4 of an inch deep cooler. The kit will include a sandwich adapter to allow you connect the oil outlet and inlet lines the engine to the cooler. The kit includes different size sleeve nuts to you can install your engine oil filter to the sandwich adapter. Your year Ford Ranger will use the 3/4-16 sleeve.
Review... view full answer...
You can use a transmission cooler like an engine oil cooler, however, to make it work properly there are adapters and modifications that will be required.
A better option would be the Derale Engine Oil Cooler # D15501 which will fit your 2009 Chevy Silverado and comes with all necessary installation hardware which will make your installation much easier.
When picking out an engine oil cooler the guideline is to pick a cooler that can accommodate the same engine oil filter thread. Your... view full answer...
Because there is not a lot of space in the engine compartment on a lot of vehicles, I usually gravitate towards a smaller stacked plate cooler because they take up less space. For your 2006 Chrysler T and C, I recommend the Derale Stacked-Plate Engine Oil Cooler Kit, # D15602. This cooler measures 13 inches wide, 4-9/16 inches tall, and 2 inches deep. It comes with multiple engine thread types so you will just need to use the one that fits your specific engine size.
For a transmission... view full answer...
I have a solution for you for an engine oil cooler for your 2008 Toyota Tacoma. The Derale Tube-Fin Engine Cooler Kit w/ Adjustable Sandwich Adapter, # D15505, is a tube-fin cooler design that uses the sandwich adapter to connect to the oil filter base on the engine.
The kit includes multiple filter sleeve nuts for multiple applications on different vehicles. For your 4.0L V6 on your Toyota, you will need to use the 3/4 inch -16 thread sleeve for your application.
For a more higher performance... view full answer...
Yes, adding an Derale Plate-Fin Engine Oil Cooler Kit # D15405 will greatly help to reduce engine oil temperatures. With your 2011 Ford F-150 having the 2 turbochargers they are transferring a lot of heat into the engine oil as that is what lubricates and cools the turbos. This cooler is much larger at 9-7/8" Wide x 9-1/2" tall than the factory cooler to reduce the engine oil temperature much better.
We also have the Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450 which... view full answer...
Since you are interested in an engine oil cooler and an additional transmission cooler I would recommend you consider getting a combination transmission and engine oil cooler like part # D15902. This product has multiple thread options so it should fit your vehicle.
The benefit to a combination cooler like this is that you only have to mount one cooler yet it will function to cool the transmission fluid and engine oil of your vehicle.
I attached an FAQ on transmission coolers and engine... view full answer...
Since you are looking for an engine oil cooler and a transmission cooler I would recommend a Derale Combination Transmission and Engine Oil Cooler # D15902. You will be able to route both your transmission fluid and engine oil through this unit to keep both your engine oil and transmission fluid cool. The multiple thread adapter the kit comes with is compatible with your 2016 Ram 1500 with a 5.7 liter Hemi.
I attached an FAQ on transmission coolers and engine oil coolers as well as a video... view full answer...
Seems like you're looking to cool your engine oil. This Derale Engine cooler kit # D15450 is designed to fit GM vehicles. Mount it wherever you will get the most air flow. Whenever adding engine oil coolers, remember that you will increase the amount of oil you can carry. view full answer...
In order to install the Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan part # D15450 on your 1995 Fleetwood Motorhome with 7.4L 454 GM Gen V Engine you will need to simply remove the factory oil cooler lines that feed into the engine block next to the oil filter and then attach the new oil cooler lines with fittings directly to this ports thereby bypassing the factory oil cooler. The sandwich adapter would then not be used for this install. view full answer...
Go To Results